As an Amazon Associate I earn from qualifying purchases.
Danco #ad - Water-saving dual flush toilet repair kit: converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. Eliminates toilet leaks: eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain; the permafit silicone seal is also chlorine and chemical resistant and will not warp.
Flush valve replacement installation tip: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve. The hyr451t combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
Compatibility: the dual flush converter works with standard 2 in. The second complete push button at end is the Full Flush that uses the normal amount of water for solids. Flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found.
Fluidmaster #ad - Easy-to-install and fully adjustable for a wide range of settings, without removing the valve. Save water & money, uses up to 45% less water. Retrofits to any 2” flush valve toilet, 1. 6 gpf and pre 1994 3. 5+ gallon per flush models.
T Tulead #ad - Flush valve height:210mm/8. 27". Easy to install, half and full water level adjusters to control water consumption. Package content:1 × toilet fill valve;1 × Toilet Flush Valve;1 × Toilet Push Button.
Zone Industry Corp. #ad - Design & certification: silicone seal free from leakage. Fit for most standard top brand 2” toilets with 2 3/8" to 2 3/4" tank Drain and 5/8" to 3/4" Square Button Mount Hole or 1 1/2" Round Lid Hole.
Save water & money: dual flush valve with Full/Half flush that saves water and eliminates common leaky toilet problems due to a worn-out flapper, handle, or faulty flapper chain. Easy installation: dual flush valve installs in less than 15 minutes.
Next by Danco #ad - Dual-flush light-touch lever unique split handle design: the short center lever is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. The second complete push lever at end is the Full Flush that uses the normal amount of water for solids.
Important installation tip: do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
Toilet flush valve compatibility: the dual flush converter works with standard 2 in. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found. Hassle-free installation: drop-in installation without tools in 5 to 10 minutes - tank removal not required. Eliminates toilet leaks: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain. Not compatible with mansfield toilets.
R&T #ad - Lighter pushing force, more convenient for elder and children. Using together with r&t fill valve & tank to bowl gasket and bolts will make your toilet flush like new again. Easy installation & adjustmenteasy installation without tools.
Water-savingthe 3 in. 80 mm dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill.
Adjustable overflow tube to fit different tank heights11. 22"-15. 15", half and full water level adjusters to control water consumption. Please note: fill valve, gasket and bolts kit are sold separately. Modern top mount dual push buttonEndurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid.
Danco #ad - Built to last: constructed of durable plastic and the Perma fit silicone seal is chemical resistant and will not warp. Compatibility: fits 1. 6 to 3. 5+ gpf gallons per flush standard 2-piece toilets with 2 in.
Easy no-tools required installation: simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required. Repairs common leaky toilet issues: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet flapper, chain and handle which can often break.
Durable construction - Chlorine chemical resistant and will not warp. Flush valve and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid; Note: Will NOT FIT Mansfield toilets and is not compatible.
Faotup #ad - Product category: water tank accessories. Product function: this product is a toilet flushing device, installed in the toilet tank to control the in and out of the water.
VALLVATER #ad - 1. Universal design: flush valve repair kit suitable for most 2-Inch one piece with top push buttom toilet. 4. Quick and easy installation: our toilet drain valve is suitable for most one piece toilets. Not including flapper valve easy to install in 10 minutes or less, and saves time and effort, get your toilet flushing like new again.
2. Measure two size: this item is only applicable to 2. 56"-2. 95"65mm-75mmabout the size of a baseball toilet tank hole Diameter, and it cannot be used if it exceed this size.
Fit for toto thu338 flush valve. 5. Tips: please check the size in the second image before buying. 3. Dual flush water-saving type: dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
WDONAY #ad - Lighter pushing force, more convenient for elder and children. Sizeflush valve height: 210mm/8. 27", fits for 255-305mm/10"-12" Toilet Tank.
Adavantageeliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain. Packagedual flush toilet repair kit, including 1 toilet fill valve, 1 toilet flush valve, and 1 toilet push button.
1. Danco
#adPush Btton Handle, Danco HYR460 Hydroright HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve, White
#adFlush valve replacement installation tip: Be sure to place the Dual Flush Converter directly in the center of your existing flush valve. The hyr451t combines two products that together will increase your toilet’s efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve.
More information #ad
Important installation tip: do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve. Dual-flush light-touch button unique split handle design: the short center button is the Quick Flush setting that uses significantly lower water volumes for liquids and paper – this setting is needed 4 out of 5 times. Compatibility: the dual flush converter works with standard 2 in. The second complete push button at end is the Full Flush that uses the normal amount of water for solids. Flush valves and requires a 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found.
| Brand | Danco #ad |
| Manufacturer | Next by Danco #ad |
| Height | 12.6 Inches |
| Length | 7.2 Inches |
| Width | 3.5 Inches |
| Part Number | HYR460 |
| Model | HYR460 |
| Warranty | 1 year limited warranty |
More information #ad
2. Fluidmaster
#adFluidmaster 550DFRK-3 DuoFlush Complete Fill and Dual Flush Conversion System
#adMore information #ad
Convert your existing 2” flush valve toilet to Dual Flush technology. Replace noisy and slow filling inefficient models. Complete fill & dual flush conversion system. Full and half flush, Dual Action toilet flush lever included. Performax high performance Fill Valve included for 2x greater refill rate.| Brand | Fluidmaster #ad |
| Manufacturer | Fluidmaster #ad |
| Height | 12.4 Inches |
| Length | 4.3 Inches |
| Weight | 2 Pounds |
| Width | 8.1 Inches |
| Part Number | 550DFRK-3 |
| Model | 550DFRK-3 |
More information #ad
3. T Tulead
#adT Tulead Toilet Dual Flush Valve,Fill Valve,Push Button,Toilet Repair Kit 210mm Height, for 255-305mm Toilet Tank
#adMore information #ad
Perfect replacements for toilet components, easy to clean and maintain. The double flush valve of the toilet can adjust the water level up and down to achieve full flush or half flush, can save water to reduce unnecessary expenses.| Brand | T Tulead #ad |
| Manufacturer | T Tulead #ad |
| Part Number | ADD03380 |
| Model | ADD03380 |
More information #ad
4. Zone Industry Corp.
#adPush Button, Converter Kit, ZONE INDUSTRY CORP. Dual Flush Valve, with gasket and bolts kits, Water-Saving, Replacement, For Use with Standard 2-inch Flush Valves, UPC & CUPC Listed Toilet Repair Kit
#adSave water & money: dual flush valve with Full/Half flush that saves water and eliminates common leaky toilet problems due to a worn-out flapper, handle, or faulty flapper chain. Easy installation: dual flush valve installs in less than 15 minutes.
More information #ad
Works with standard 2-inch flush valve toilets, easy to upgrade a single flush toilet to dual flush. Ideal product: fits for 1. 6 to 3. 5 gallons per flush toilet with a 2-inch flush valve. Upc & cupc, water-saving certification and so on. Fix toilet problem: this toilet repair kit with 2-inch flush outlet; For two-piece toilet; replaces poor performing or cracked flush valves.| Brand | Zone Industry Corp. #ad |
| Manufacturer | ZONE INDUSTRY CORP. #ad |
| Part Number | ZFK10 |
| Model | ZFK10 |
More information #ad
5. Next by Danco
#adWhite, Lever Handle, Danco HYR451T HyrdroRight Universal Water-Saving Toilet Repair Kit with Dual Flush Valve
#adImportant installation tip: do not remove overflow tube and flush valve from toilet tank; the Dual Flush Converter is a replacement to the existing flapper; slide the blue silicone dome gasket down the overflow tube, seating the gasket into the flush valve.
More information #ad
Water-saving dual flush toilet repair kit: easily converts a standard toilet into a dual flush toilet that saves water by reducing the amount of water used with each flush. The permafit silicone seal is also chlorine and chemical resistant and will not warp. The hyr451t combines two products that together will increase your toilet's efficiency: HYR271 Dual Flush Converter and HC630 HydroClean fill valve. Toilet flush valve compatibility: the dual flush converter works with standard 2 in. Detects leaks & water adjustment calibration: Detects leaks and signals when a leak is found. Hassle-free installation: drop-in installation without tools in 5 to 10 minutes - tank removal not required. Eliminates toilet leaks: Eliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain. Not compatible with mansfield toilets.
| Brand | Next by Danco #ad |
| Manufacturer | Next by Danco #ad |
| Height | 10.5 Inches |
| Length | 3 Inches |
| Weight | 0.1 Pounds |
| Width | 3 Inches |
| Part Number | HYR451T |
| Model | HYR451T |
| Warranty | Limited 1 Year |
More information #ad
6. R&T
#adR&T A2422M 3" Dual Flush Valve with Push Button Dual Flush Toilet Repair Kit Toilet Tank Parts Replacement for 2-piece Toilet
#adWater-savingthe 3 in. 80 mm dual flush valve provides optional full flush for powerful flushing and half flush for water-saving flushing which reduces your bill.
More information #ad
Warrantydirect supply from global leading manufacturer, backed by 5 Years Warranty. Enhance your toilet's performancefix a leaking toilet with 3" 80 mm drain outlet and turn into a powerful flushing. Adjustable overflow tube to fit different tank heights11. 22"-15. 15", half and full water level adjusters to control water consumption. Please note: fill valve, gasket and bolts kit are sold separately. Modern top mount dual push buttonEndurable chrome ABS, fits dual flush toilet with 48mm mounting hole on ceramic lid.
| Brand | R&T #ad |
| Manufacturer | Xiamen R&T Plumbing Technology Co.,Ltd #ad |
| Height | 4 Inches |
| Length | 11 Inches |
| Width | 7 Inches |
| Part Number | RT-FLV-01 |
| Model | RT-FLV-01 |
More information #ad
7. Danco
#adChrome, Danco HYR270 Hydroright Water-Saving Dual Flush Valve with Push-Button Handle
#adEasy no-tools required installation: simple Drop-in installation without tools in less than 20 minutes with NO TANK REMOVAL required. Repairs common leaky toilet issues: Eliminates the most common problems in toilets that cause leaks as this flush valve replaces a worn-out toilet flapper, chain and handle which can often break.
More information #ad
Water-saving toilet flush valve: the hydroRight replacement toilet flush valve easily converts most standard toilets into a dual-flush water-saving toilet which uses up to 70% less water for liquids and paper. Durable construction - Chlorine chemical resistant and will not warp. Flush valve and requires 10-inch minimum clearance from highest point of the flush valve opening to the inside of the tank lid; Note: Will NOT FIT Mansfield toilets and is not compatible.
| Brand | Danco #ad |
| Manufacturer | Next by Danco #ad |
| Height | 10.5 Inches |
| Length | 4 Inches |
| Weight | 0.9 Pounds |
| Width | 3 Inches |
| Part Number | HYR270 |
| Model | HYR270 |
| Warranty | 1 year warranty |
More information #ad
8. Faotup
#adFaotup 1PCS White 2 Inch Dual Flush Valve Replacement kit,Dual Flush Valve Button 220ML,Universal Toilet Repair Kit,Toilet Flush Valve 2 Inch,10.11×4.52×3.30Inches
#adMore information #ad
Reasonable design: This product can adjust the water volume;easier to clean. Package contains:1PCSx Toilet Flush Valve. Good quality: abS Plastic material is not easy to damage.| Brand | Faotup #ad |
| Manufacturer | Faotup #ad |
| Part Number | BT0791 |
| Model | BT0791 |
More information #ad
9. VALLVATER
#adToilet Flush Valves 2-Inch Replacement Valve Kit Assembly for One Piece Dual Flush Drain Valve Repair Compatible with TOTO THU338N
#ad2. Measure two size: this item is only applicable to 2. 56"-2. 95"65mm-75mmabout the size of a baseball toilet tank hole Diameter, and it cannot be used if it exceed this size.
More information #ad
Measure the tank height: Height Should be 10"- 11. 8" 25. 4 cm-30 cm. Please measure the size including ceramic cover for water tank, otherwise, it won't fit. Fit for toto thu338 flush valve. 5. Tips: please check the size in the second image before buying. 3. Dual flush water-saving type: dual flush water-saving type: for all drainage you can adjust water in the water tank; for half drainage, you can use the water in the water tank to adjust the silicone seal, it with good sealing effect, will not have leaking.
| Brand | VALLVATER #ad |
| Manufacturer | Teayako #ad |
| Height | 8 Inches |
| Length | 8 Inches |
| Width | 3 Inches |
More information #ad
10. WDONAY
#adToilet Fill Valve Dual Flush Toilet Repair Kit for 10"-12" Toilet Tank,Type-1, WDONAY 8.27" Height Toilet Dual Flush Valve with Push Button
#adAdavantageeliminates common leaky toilet problems due to a worn-out flapper, handle or faulty flapper chain. Packagedual flush toilet repair kit, including 1 toilet fill valve, 1 toilet flush valve, and 1 toilet push button.
More information #ad
That reduces your bill. Featurethe dual flush valve provides optional full flush for powerful flushing and half flush for water-saving. Easy to installeasy installation without tools and converts a standard toilet into a 2-button, dual flush toilet that saves water by reducing the amount of water used with each flush.| Brand | WDONAY #ad |
| Manufacturer | WDONAY #ad |
| Part Number | MS0021 |
| Model | MS0021 |
More information #ad
30-90% Disocunts Found!
We found that some of the products on this list are now discounted on Amazon! Do you want to see these products?
Disclaimer: We earn small fee from purchases made on Amazon.
